Metal Pretreatment and Coating Services

Powder coating is a dry finishing process in which free-flowing, thermoplastic or thermoset powder material, rather than a liquid suspension, is applied to a surface, melted, and then allowed to dry and harden into a protective coating. Typically, the powder is applied via electrostatic spray deposition (ESD) to an electrically grounded metal substrate. Once the […]

Bonderized steel consists of hot dipped galvanized steel (G90 grade) that is pretreated with a phosphate followed by a chromate sealer and dried off in an oven. The process produces a dull, gray-colored finish. Bonderized is commonly referred to as “Paint Grip.” This product is commonly used for roofing, wall panels, and coil. As for […]

Much work has been done on formulations for wood and MDF, but other substrates such as fiberglass, drywall and many others are also viable options. A variety of applications Manufacturers of kitchen cabinetry, commercial casework, hospitality furniture, pre-finished sheet goods and office furniture manufacturers are extremely excited about the potential these low cure powder coatings […]

Military vehicles, equipment, ships and aircraft are all exposed to extreme conditions. For the U.S. Armed Forces, only military grade paints that meet stringent military standards are suitable for these conditions. Chemical Agent Resistant Coatings (CARC) are well-known military grade paints. Products meeting this specification resist the penetration of chemical agents and require special storage. […]